SSC JE 2023 Exam Pattern, Syllabus and Eligibility Criteria Complete Details.

 Civil Engineering, Electrical Engineering, JE Civil, JE Electrical, JE Mechanical, Mechanical Engineering, Non-Tech, SSC JE 2023, SSC JE civil, SSC JE Civil Syllabus, SSC JE Eligibility Criteria, SSC JE Exam, SSC JE form, SSC JE GS syllabus, SSC JE Online Registration

With the aim to secure a promising government job in the public sector domain, hundreds and thousands of engineering graduates appear for the (SSC-JE) examination. SSC-JE is conducted by the Staff Selection Commission to fulfill the post of Junior Engineers in various government departments.

Also, Staff Selection commission conducts this recruitment for a good number of vacancies, therefore SSC-JE is on the most chosen exam amongst engineering graduates as it helps them utilize their technical skills along with building a promising career and an overall development.

Therefore, it becomes quite essential that the aspirants preparing for SSC-JE should know all about this examination to ensure they make the right decision and take the right steps. Before we dive into the exam pattern, syllabus, and SSC-JE eligibility criteria, let us figure out the answers to some of the most common queries.

SSC-JE full form is Staff Selection Commission – Junior Engineer.

SSC-JE holds amazing opportunities for engineers who want to prepare for the SSC exam. Some other reasons that make the SSC-JE exam popular are as follows:

• The syllabus is significantly less than that of the UPSC exam.
• One can get the right opportunity according to their personality and choice, which may include the Ministry of railways and the Ministry of external affairs.
• Facility to get exposure to both technical and real-world aspects along with a promising salary.

Staff Selection Commission released the answer key for SSC JE 2022 examination on 22^nd November 2022.

Yes. SSC-JE Part-1 paper has 0.25 marks negative marking per the wrong answer. SSC-JE Part-2 paper has no negative marking.

The SSC-JE online registration for the 2023 session has not started yet. Therefore, the aspirants are requested to keep a track of the same on commissions website by regularly reviewing the latest updates.

The marks distribution of SSC-JE includes the following:

The examination structure of the SSC-JE exam is divided into two parts. This includes paper-I and paper-II.

1. Paper-I: Computer-Based Examination
2. Paper-II: Written Examination

The detailed SSC JE exam pattern includes the following:

General Intelligence and Reasoning: The syllabus for General Intelligence includes questions of both verbal and non-verbal types. The crucial topics include questions on analogies, similarities, differences, space visualization, problem-solving, analysis, judgment, decision-making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, and arithmetical number series, etc. The test will also include questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations, and other analytical functions.

• General Awareness: This section tests the environment’s general awareness around them with the application to society. Apart from this, the important topics include topics pertaining to History, Culture, Geography, Economics, General Polity, Scientific research, etc.

• General Engineering (Civil & Structural) and (Electrical & Mechanical):

Building materials, estimating, costing and valuation, surveying, soil mechanics, hydraulics, irrigation engineering, transportation engineering, and environmental engineering.

Structural Engineering: Theory of Structures, Concrete Technology, RCC Design, and Steel Design.

Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt motors and single phase induction motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization, Electrical Energy, and Basic Electronics.

Theory of Machines and Machine Design, Engineering Mechanics and Strength of Materials, Properties of Pure substances, 1^st and 2^nd Law of Thermodynamics, Air standard cycles for IC Engines, IC Engine Performance, IC Engines Combustion, IC Engine Cooling and Lubrication, Rankine cycle of System, Boilers, Classification, Specification, Fitting and Accessories, Air Compressors and their cycles, Refrigeration cycles, Principle of Refrigeration Plant, Nozzles and Steam Turbines.

Properties and Classification of Fluids, Fluid Statistics, Measurement of Fluid Pressure, Fluid Kinematics, Dynamics of Ideal Fluids, Measurement of flow rate, Basic principles, Hydraulic Turbines, Centrifugal Pumps, and Classification of steels.

Building Materials: Physical and Chemical Properties, classification, standard tests, uses and manufacture/quarrying of materials, e.g. building stones, silicate-based materials, cement (Portland), asbestos products, timber, and wood-based products, laminates, bituminous materials, paints, and varnishes.

Estimating, costing, and valuation: Estimate, glossary of technical terms, analysis of rates, methods, and unit of measurement, items of work – earthwork, Brickwork (Modular & Traditional bricks), RCC work, Shuttering, Timberwork, Painting, Flooring, Plastering, Boundary wall, Brick building, Water tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezoidal formula, and Simpson’s rule.

The other topics include cost estimate of the septic tank, flexible pavements, tube well, isolates and combined footings, Steel Truss, Piles, and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, and methods of valuation.

Surveying: Principles of surveying, measurement of distance, chain surveying, working of the prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature, and refraction connections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, earth work calculation, advanced surveying equipment, and curve setting.

Soil Mechanics: Origin of soil, phase diagram, definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weighs, density index, interrelationship of different parameters, Grain size distribution curves, and their uses, index properties of soils, Atterberg’s limits, ISI soil classification, and plasticity chart, the permeability of soil, co-efficient of permeability, determination of coefficient of permeability, unconfined and confined aquifiers, effective stress, quick sand, consolidation of soils, Principles, and degrees of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, and computation of ultimate settlement.

Some other topics include the Shear strength of soils, direct shear test, Vane shear test, Triaxial test, soil compaction, laboratory compaction test, maximum dry density, optimum moisture content, earth pressure theories, active and passive earth pressures, bearing capacity of soils, plate load test, and standard penetration test.

Hydraulics: Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, flumes, spillways, pumps, and turbines.

Irrigation Engineering: Definition, necessity, benefits, ill effects of irrigation, types, and methods of irrigation, Hydrology – Measurement of rainfall, runoff co-efficient, rain gauge, losses from precipitation – evaporation, infiltration; Water requirement of crops, duty, delta and base period, Kharif and Rabi crops, Command area, Time factor, Crop ratio, Overlap allowance, and irrigation efficiencies, different type of canals, types of canal irrigation, loss of water in canals.

Other important topics includes types, and advantages of canal lining, shallow and deep wells, yield from a well, weir and barrage, failure of weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity, Lacey’s theory of uniform flow, definition of flood, causes and effects, methods of flood control, water logging and preventive measure, land reclamation, characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes, and major irrigation projects of India.

Transportation Engineering: Highway Engineering – cross-sectional elements, geometric design, types of pavements, pavements materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering – Components of the permanent way – sleepers, ballast, fixtures, and fastening, track geometry, points and crossings, track junction, stations, and yards.

The other topics in transportation engineering include traffic engineering – different traffic survey, speed-flow-density, and their inter-relationships, intersections, and interchanges, traffic signals, traffic operation, traffic signs, markings, and road safety.

Environmental Engineering: Quality of water, source of water supply, purification and distribution of water, need for sanitation, sewerage systems, circular and oval sewer, sewer appurtenances, and sewage treatments. The other topics include surface water drainage, solid waste management – types, effects, and engineered management system, air pollution – pollutants, causes, effects, and control; noise pollution – cause, health effects, and control.

Part B: Electrical Engineering

Basic concepts, Circuit law, Basic electronics, AC Fundamentals, Generation, Magnetic Circuit, Electrical Machines, Utilization, and Electrical Energy, Transmission and Distribution, Estimation and costing, Fractional Kilowatt Motors and single-phase induction motors, Measurement and measuring instruments, Synchronous machines.

Part C: Mechanical Engineering

Theory of Machines and Machine Design, IC Engines Combustion, Air standard cycles for IC Engines, IC Engine Performance, 1^st and 2^nd Law of Thermodynamics, Boilers, IC Engine Cooling and Lubrication, Classification, Rankine cycle of system, Engineering Mechanics and Strength of Materials, Specification, Centrifugal Pumps, Basic Principles and Classification of steel, Hydraulic Turbines, Dynamics of Ideal Fluids.

The other topics include Fluid kinematics, Measurement of Fluid Pressure, Properties and Classification of Fluids, Air Compressors and their cycles, Refrigeration cycles, Fluid Statics, Measurement of Flow rate, Fluid statics, Nozzles and Steam Turbines, Principle of Refrigeration Plant, and Fitting and Accessories.

SSC-JE eligibility criteria include the following:

The respective candidate must possess diploma or graduate degree in the field of engineering from a university that is recognized by the Government of India.

As per the latest update, the SSC-JE age limit varies with the respective position. (For more clarity the aspirants requested to review the latest notification).

Thus, if you are one of the aspirants preparing for the SSC-JE exam, then the above-mentioned information may prove useful for you. However, we also request you to refer to the latest notification as soon as it is released to ensure there are no loose ends.

Hope you found this blog post useful!

All the best for your upcoming SSC-JE exam!

Dear Aspirants,

Take your Rpsc, SSC (Jen & Aen), RRB, Panchayati Raj and other competitive exam preparation to the next level. ZONE TECH YouTube channel has a lot of content to offer. From Current Affairs, Previous Year Questions, Aptitude, Technical sessions, Mock interviews, Study tips, etc. all are available under one roof.

So, Hurry and Subscribe to ZONE TECH YouTube channel now and never miss an update.