In a drill operation:

Railway rails are generally made of 

In case of slotting machine, cutting action takes place in:

The size of a shaper is specified by:

For which machines, are very large speed range required?

Which part of the cutting tool is prone to crater wear?

Quick return mechanism is incorporated in a 

Orthogonal cutting system is also called

In a shaper, metal is removed during

The following type of chip is produced when machining ductile materials:

Select the correct sequences of the following parameters in descending order of influence on tool life

1. Feed rate

2. Depth of cut

3. Cutting speed

Size of shaper is specified by:

Milling machine is classified as horizontal or vertical type, depending on the position of:

Continuous chips are formed when machining:

Which of the following machines does not require quick return mechanism?

For drilling operation, the cylindrical hob should always be clamped on a:

In which of the following operations on lathe, will the spindle speed beminimum?

The operation of sharpening a grinding wheel is called:

When turning long shaft on a lathe, its bending can be prevented by:

In grinding operation, for grinding harder material:

A universal dividing head is used to perform a milling operation by:

Reaming is the operation of:

For a carburising flame, the flow of ________is kept higher.

Coated electrodes are used in ________ .

Which one of the following methods is generally not used in welding of chromium molybdenum steels?

Oxygen cylinders are

During soldering

Arc blow is a welding defect which is encountered 

Ceramic tools are fixed to tool by the following process

Plainand butt welds may be used on materials upto approximately

The bonding of a rubber sheet with a metal is done by 

Thermite is a mixture of 

Preheating is essential in welding

In arc welding, arc is created between the electrode and work by 

Open circuit voltage for arc welding is of the order of

The main criterion for selection of electrode diameter in arc welding is 

In arc welding, eyes need to be protected against:

The drawing representation shown in die figure given below for welding is used to represent

Two sheets of same material but different thickness can be butt welded by________.

Pick up the incorrect statement about MIG welding

In arc welding operations the current value is decided by________.

Preheating is essential in welding________.

Magnetic arc blow is ________ .

In braze welding, the filler metal is

A. Distributed by capillary action

B. Melted and deposited at the point where the weld is to be made

C. Not required

The most commonly used flame in gas welding is

A.Neutral

B. Oxidising

C. Carburising

Carburizing flame is used to weld metals like________.     

Binding wire used to support the joints for soldering is made of________.

Oxygen to acetylene ratio in case of carburizing flame is________.

Electrode gets consumed in the following welding process ________ .

Black colour is generally painted on