The brakes commonly used in motor cars is

Reason for clutch drag or spin is:

Which of the following gear box use double de clutching process?

The parts of the cover assembly that hold the pressure plate against the clutch plate are the 

If the clutch disc is not completely released when clutch pedal is fully depressed, __________ occurs. 

What is the type of clutch?

In Disc clutch, the clutch disc acts as a

The following type of arrangement is used in synchromesh type gear box 

The following is not a Friction clutch

Which type of clutch does not require clutch pedal? 

What is the spray cone angle in the Pintle nozzle?

What is the range of pressure is achieved in the injection pump?

Which of the following is the port fuel – injection system ?

What are the three main types of brake pads?

What should you always wear when installing a replacement light bulb?

What is the correct brake-bleeding sequence?

You’ve got a car throwing an “EVAP Leak” code. What is the first thing you check?

With any electrical problem in a vehicle, what is the first thing you check?

A car is overheating, and the upper radiator hose is significantly cooler than the lower hose. What’s the likely issue?

A customer brings in already-balanced aftermarket wheels and tires for you to install. What do you need to add to prevent vibrations?

A chassis dynamometer measures the vehicle power at the

For tightening cylinder head bolts we should prefer to use

A steering dampener may be needed to reduce shimmy on vehicles that have high positive ________.

If the top of the steering axis is tilted 2 degrees toward the rear of the vehicle, this is ________.

Which alignment angle is adjustable on all vehicles?

When performing an alignment, which angle is the most important for tire wear?

how the front tires would wear due to the excessive camber.

•  Incorrect steering axis inclination (S.A.I.) causes

• The function of a governor in automobiles is to

An overinflated tyre will wear the tread most

The disadvantage of radial ply tyre compared to cross-ply tyre is

The term 'ply rating' with reference to a tyre refers to the

Condition where one front wheel is set farther back from front than other known as 

Position or direction of two front wheels in relation to two rear wheels known as

North American term for a boxy wagon-type of car usually containing three or four rows of seats, with a capacity of six or more passengers known as 

Derivative of a pickup truck or 4 -wheel-drive vehicle, but with fully enclosed passenger cabin interior and carlike levels of interior equipment, known as

The purpose of turning radius gauges is to measure the

What is concluded in section 112 of the Motor Vehicles Act 1988?

All motor vehicles must be covered by _________ Insurance

What should be ensured before overtaking a vehicle?

A transport vehicle transport vehicle can be distinguish by

Use of horn prohibited

Parking is permitted

Over speeding

What is the percentage increase in penalty charges related to motor vehicles per year?

When new motor vehicle act came into force?

Which convention justify the regulations for the driving on foreign licence?

As per the Central Motor Vehicle Rules, 1989 TREM stands for ____________.

What is the full form of HSRP as per central Motor vehicle act?