The objective of creating the sinking fund is to accumulate the sufficient money to

Shear center of a half circular section of radius r and of constant thickness, lies at a distance of x from the center, where x is

Which level has internal compensator mechanism to automatically adjust the line of sight?

A reduction factor C_r to load carrying capacity for a long column of effective length Le and width b is applied as obtained from following expression:

In traversing by included angle method, which of the following is correct?

The moment of inertia of a circular area about its diameter is I_XX. The moment of inertia of the same circular area about an axis perpendicular to the plane of the area is I_ZZ. Which of the following statements is correct?

Polyethylene and polyvinyl chloride resins are used in various parts of building areas for:

Munsell references are primarily used for classifying which of the following materials?

Four columns are identical in all parameters except end conditions. Arrange them in their ascending order of load carrying capacity.

I. Both ends are hinged

II. Both ends are fixed

III. One end is fixed and the other end is free

IV. One end is fixed and the other end is hinged

Design of a two way slab simply supported on edges and having no provision to prevent the corners from lifting is made by

If the bearing is not specified for the lintel, in the estimation it is usually taken as

Indicating works left in excavated trenches to facilitate the measurement of borrow pits are known as

If in planar system, X parts/members are there with Y no. of forces, then condition for statically determinacy is:-

On rolling land , the method of applying water is

Which of the following method is used for estimation of depreciation of building?

A_b and A_c are the cross sections of bronze and copper bars of equal length.σ_b,σ_care their respective stresses due to load P. If P_band P_c are the loads shared by them

Which of the below is not a plaster finish? 

Which of the following will have more viscous bitumen?

The carpet area of a residential building is generally ______ of its plinth area.

The value of maximum shear force in a rectangular section of a beam having depth 150 mm is 50 kN. Calculate the width of the beam section if the permissible maximum shear stress of material is 5 MPa.

To obtain high compressive strength of cement at

When R is radius of the curve (in meters), D is the degree of curve (in degrees) and length of the chord is 30m, then the relation between  R and D is:

Calculate the water distribution efficiency, if the depths of penetration along the length of a border strip at an interval of 20 m are 1.5 m, 1.8 m and 2.1 m respectively.

With respect to plane table surveying, the terms 'triangle of error', 'great circle', 'great triangle' are related to

If a cantilever beam of length L is subjected to a couple M₀ at its free end, then:

What is the grade of timber as per timber grading (IS 6543), if modulus of elasticity in bending is between 5.6 to 9.8 kN/mm²?

If L is the effective length of a column and B is the least lateral dimension, then the column will be treated as short column if the ratio of L/B is equal to or less then.

The dip of the compass needle

How much water is added in cement mortar to determine compressive strength of cement?

Which of the following pencil lead is softest ?

If the unit has one or more moving parts, the extreme positions of the moving parts are indicated in the:

What is the maximum number of auxiliary views of any given object ?

Symbol in a drawing represents

If a line is perpendicular to V.P. and parallel to H.P., its front view will be

In the network shown below the critical path is along

 

Cost slope of the direct cost curve is given by

The area of sloping surface of a protective embankment of mean height d, side slopes S : 1 and length L is

Pick up the item of work not included in the plinth area estimate.

A sample of dry soil is coated with a thin layer of paraffin and has a mass of 460g. It displaced 300 cc of water when immersed in it. The paraffin is peeled off and its mass was found to be 9 g. If the specific gravity of soil solids and paraffin are 2.65 and 0.9 respectively, the voids ratio of soil is nearly

In case of footing on the surface or shallow depth is very dense sand, which one of the following types of failure is likely to occur?

If retaining wall 5 m high is restrained from yielding, what is the at-rest earth pressure per meter length of wall? (Consider the backfill is cohesionless soil having Φ=30^o and ,γ=18kN/m³)

For a sheet pile wall constructed in a soil having effective grain size = 0.1 mm, the difference of the upstream and downstream water levels is 3 m. If the flow net drawn for the problem yields 2 as the ratio of number of head drops to number of flow channels, then what is the discharge in unit of m³/s/m length of sheet pile wall?

The void ratio of a give soil A is twice that the another soil B, while the effective size of particles of soil A is one-third of that of soil B. The ratio of height of capillary rise of water in soil A to that in soil B will be

A soil deposit has a void ratio of 1.0. If the void ratio is reduced to 0.60 by compaction, the percentage volume loss is

When drawing a line using the relative coordinate system a line is created from

How long will line from 1,8 to @ 5 < 10 be?

Who formulated the six ground rules to be considered in designing?