Identity the
incorrect statement, from the following options
Industrial
steam generators that are used in sugar and paper industries or hospitals ________
.
Identifytheincorrectstatement, from the following options related to the
below statement. Superheated steam is used in a Rankine power cycle ________ .
Coke is produced by
Which of the
following curve is TRUE for the isothermal process for wet steam to get
converted to superheated steam?
The Rankine cycle will approach to Carnot cycle if
In cooling
tower, water is cooled by the process of
Filling or
decking in a cooling tower increases the rate of heat transfer by providing
Steam engine
operates on
An ideal
regenerative cycle’s efficiency is
The dry
saturated steam at very low pressure, (
In cooling tower, water is cooled by the process of
What value of the dryness fraction (in %) represents the dry saturated state of vapour?
The solid
fuel having the highest calorific value is
The maximum
continuous power available from a hydroelectric plant under the most adverse
hydraulic conditions is known as ________.
The overall
efficiency of thermal power plant is ________ .
Which combination of the following statements is correct?
The incorporation of re-heater in a steam power plant
A. Always increases the thermal efficiency of the plant
B. Always increases the dryness fraction of steam at condenser inlet
C. Always increases the main temperature of heat addition
D. Always increases the specific work output
In a cross
compound steam engine ________.
If a reheater is added to a Rankine Cycle, then usually
The difference between the temperature of the superheated steam and the liquid vapour saturation temperature at the corresponding pressure is known as :
For the same maximum temperature in the cycle, the average temperature of heat addition of a Rankine cycle compared to that of Carnot cycle is :
The
recommended cycle for a steam power plant is
Thermal plant
works on
A
watt governor in working has a height of 2 m. Calculate the speed (in rpm) of
the governor?
कार्यशील अवस्था में एक वॉट गवर्नर की ऊंचाई 2 मीटर होती है। गवर्नर की गति (आरपीएम में) की गणना करें?
How
is sensitivity and stability related to governor?
Which of the following governors is also known as dead weight type
governor?
निम्नलिखित में से किस गवर्नर को डेड वेट टाइप गवर्नर के रूप में भी जाना जाता है?
A
governor is said to be isochronous, when its equilibrium speed ________ at
rotation at all radii of ball.
एक गवर्नर को समकालिक कहा जाता है, जब गेंद की सभी पर घूर्णन त्रिज्याओं पर इसकी संतुलन गति ________ होती है।
What
is the value of the sensitivity of the isochronous governor?
समकालिक गवर्नर की संवेदनशीलता का मान होता है?
Which
of the statement is CORRECT about the height of simply watt governor?
वाट गवर्नर की ऊंचाई के बारे में कौन सा कथन सही है?
A
Hartnell governor comes under which type of governor?
हार्टनेल गवर्नर किस प्रकार के गवर्नर के अंतर्गत आता है?
What
will be the vertical height (m) of a watt governor, if the speed of rotation is
80 rpm?
यदि घूर्णन की गति 80 आरपीएम है तो वाट गवर्नर की ऊर्ध्वाधर ऊंचाई (m) क्या होगी?
Which
of the following governor does not have central load attached to their sleeves?
निम्नलिखित में से किस गवर्नर की स्लीव से केंद्रीय भार जुड़ा नहीं है?
Which
of the following is the type of pendulum governor?
निम्नलिखित में से कौन सा पेंडुलम गवर्नर का प्रकार है?
The
function of a ________ is to maintain the speed of an internal combustion
engine within specified limits for varying load conditions.
________ का कार्य अलग-अलग लोड स्थितियों के लिए निर्दिष्ट सीमा के भीतर आंतरिक दहन इंजन की गति को बनाए रखना है।
Function
of governor is to :
गवर्नर का कार्य है:
Rotating
shafts tend to of vibrate violently at whirling speeds because ________ .
घूमने वाले शाफ्ट वर्लिंग गति पर बहुत तेजी से कंपन करते हैं क्योंकि ________।
Critical
or whirling speed is the speed at which the shaft tends to vibrate violently in
_______ .
क्रांतिक या रीलिंग गति वह गति है जिस पर शाफ्ट _______ में बहुत तेजी से कंपन करता है।
The
amplitude of under-damping a small damping varies with time as ________ .
एक छोटी सी डैम्पिंग के तहत अंडर-डेम्पिंग का आयाम समय के साथ ________ के रूप में बदलता है।
Whirling speed of a shaft coincide with the natural frequency of the ________
.
शाफ्ट की वार्लिंग गति ________ की प्राकृतिक आवृत्ति के साथ मेल खाती है।
The
type of motion when the acceleration is proportional to displacement is
called________ .
गति का प्रकार जब त्वरण विस्थापन के समानुपाती होता है, उसे ________ कहा जाता है।
In
reciprocating engines primary forces ________ .
प्रत्यागामी इंजनों में प्राथमिक बल ________ होते हैं।
Partial balancing in locomotives results in
लोकोमोटिव में आंशिक संतुलन का परिणाम होता है
In
reciprocating engines, primary forces
प्रत्यागामी इंजनों में, प्राथमिक बल
In order to balance the reciprocating, masses
प्रत्यागामी , द्रव्यमान को संतुलित करने के लिए
Swaying
couple results due to
स्वेयंग कपल निम्न का परिणाम होता हैं
The
torque crank angle diagram is use for the determination of ________ by the
flywheel.
टॉर्क क्रैंक कोण आरेख का उपयोग फ्लाईव्हील द्वारा ________ के निर्धारण के लिए किया जाता है।
An
engine, as the prime mover must have both flywheel and a governor provided in
the system for which of the following purposes?
निम्नलिखित में से किस उद्देश्य के लिए एक इंजन, प्राइम मूवर के रूप में सिस्टम में फ्लाईव्हील और गवर्नर दोनों उपलब्ध होने चाहिए?
Which
equation defines the coefficient of fluctuation ?
कौन सा समीकरण उतार-चढ़ाव के गुणांक को परिभाषित करता है?
Which of the following is NOT a function of flywheel?
निम्नलिखित में से कौन सा फ्लाईव्हील का कार्य नहीं है?
Which
of the following is used for controlling energy fluctuations in an engine?
Which
of the following is TRUE for a flywheel which is retarding, if T is the torque
on the crankshaft at any instant and Tmesn